STRIP CURTAINS
Claremont Polymer Shapes is pleased to now offer transparent, flexible, STRIP CURTAINS for doors and enclosures, providing an easily installed, low-cost and long-lasting solution to plants suffering from intrusion by weather, dust, fumes and noise. They are ideal for loading docks, interior plant passages, personnel doors and, in particular, freezers. Rounded edges reduce snagging, while the overlapping concave/convex configuration allows strips to interlock when hung, forming an excellent seal and reducing heat loss. In the case of Low-Temp and Extra Low-Temp grades, continued flexibility of the material at lower temperatures becomes a key factor in reducing the energy costs associated with cooling and dehumidifying. STRIP CURTAINS offered by Claremont Polymer Shapes allow for easy passage of people, products and/or vehicles, automatically and correctly re-orienting itself once the obstruction has passed.
Most grades of STRIP CURTAIN are manufactured from a USDA approved material, and are available in a variety of thicknesses from 0.060 inch to 0.160 inch, and in widths from 6 inches to 16 inches.
Standard Strip
Manufactured from a USDA approved material, Standard Strip is most commonly used in indoor/outdoor applications, and functions at temperatures ranging from -18°C to 65°C (0°F to 150°F).
Low Temp Strip
Manufactured from a USDA approved material, Low Temp Strip is available in three configurations: smooth non-reinforced, smooth with reinforcement, or ribbed. The material is suitable for use in freezers and in exterior applications, at temperatures as low as -34°C (-30°F).
Extra-Low Temp Strip
Manufactured from a USDA approved material with a special Extra-Low Temp formulation, this strip is designed for use in freezers operating at temperatures as low as -51°C (-60°F).
Safety Strip
Safety Strip is produced in a translucent grade of fluorescent ("safety") orange. This product can be used to outline hazardous and/or high traffic areas, and can be used to guide forklift and pallet truck operators to the doors edge, thus reducing the potential for wall damage.
Weld ScreenWeld Screen is designed to reduce the hazards of welding arcs in areas adjacent to welding operations. The specially formulated material effectively screens out all the dangerous ultraviolet and near-ultraviolet light associated with welding. It performs two important safety functions by allowing the transmission of useful visible light for personnel safety, while screening light in the harmful non-visible ultraviolet spectrum. The material is flame resistant with a UL94 V-O flame rating. Weld Screen can also be used as a protective barrier in instances of UV sterilization, as well as applications such as bottle printing, where UV cured inks are being used. |
|
|
Anti-Static
Anti-Static strip reduces the tendency for dust to accumulate in plants where grinding, sanding and other similar operations produce large quantities of particulates.
Ribbed Strip
Standard, Low Temp and Safety Strip are also available with a unique triangular rib configuration. The softly rounded ribbed surfaces help reduce scratching from truck and cargo traffic, and the friction and static electricity associated with smooth strips. The ribbing on both sides creates small air pockets for additional insulation and allows the strips to move apart easily as traffic passes through. It also facilitates longer wear life in high traffic areas.
MOUNTING OPTIONS
Several standard door mount styles are available from which to choose to suit your specific plant needs. Based upon your opening size, Claremont Polymer Shapes can supply all of the necessary cut-to-length, pre-punched strips and mounting hardware to allow you to install the door.
Surface Mount
|
Uses:
Doorways where a tight seal is required. The Surface Mount fastens flush over the opening providing maximum seal.
Dimensional Requirements:
Ordering Requirements:
|
Angle Mount
|
Uses:
Doorways where no space is available for Surface Mount. The Angle Mount fastens inside the lintel of the door opening.
Dimensional Requirements:
Ordering Requirements:
|
Off-Wall Mount
|
Uses:
When overhead door tracks interfere with the mounting of either a Surface or Angle Mount.
Dimensional Requirements:
Ordering Requirements:
|
Sliding Mount
|
Uses:
When temporary removal of the STRIP CURTAIN is required.
Dimensional Requirements:
Ordering Requirements:
|
Two-Way Swing Mount
|
Uses:
When temporary removal of the STRIP CURTAIN is required and there is not enough room on either side of the door to accommodate a Sliding Mount. (Two-Way Swing Mount has a pull-cord activated centre latching mechanism.)
Dimensional Requirements:
Ordering Requirements:
|
| Replacement stock is available in rolls ranging from 100 to 500-feet in length, should your curtains become dirty or damaged. | |
